The electric arc furnace is used for the manufacture of constructional steels, high-grade steels and stainless steels. Furthermore, it is used for the manufacture of carbide and synthetic crystals.
Dust removal plants for electric arc furnaces fully extract and clean the primary waste gases of the arc furnace, as well as any secondary waste gases produced during fusing, run-off or during loading and deslagging. The waste gases that form in the pan furnace, during material handling and in other connected plants are extracted and treated.
Filter title PJM
| typical design data |
Unit of measure |
Electric arc furnace |
| Gas volume |
m³/h |
120,000 |
| Gas temperature |
°C |
120 |
| Type of dust |
|
Iron oxides combustion residues |
| Residual dust content |
mg/m³ |
< 10 |
| Raw gas dust content |
g/m³ |
< 5 - 10 |
| Cleaning |
|
online / offline |
| Filter medium |
|
Polyester |
| Explosion protected design |
|
not necessary |
| Sorbent |
|
not necessary |
Filter title PJM
| typical design data |
Unit of measure |
Roof hood |
| Gas volume |
m³/h |
1,000,000 |
| Gas temperature |
°C |
80 |
| Type of dust |
|
Iron oxides combustion residues |
| Residual dust content |
mg/m³ |
< 10 |
| Raw gas dust content |
g/m³ |
< 5 |
| Cleaning |
|
online / offline |
| Filter medium |
|
Polyester |
| Explosion protected design |
|
not necessary |
| Sorbent |
|
not necessary |
